Kenmore 10701 Bedienungshandbuch PDF herunterladen (Seite 12)

- 12 -

REMOVING CLOGS

CLEANING EXTERIOR AND ATTACHMENTS

CANISTER CARE

HOSE

When the hose is clogged with dust, remove

it in the following manner:

1. Pull out the handle by turning the

removal ring in either direction.

2. Remove any clogs in the handle. Shake

the hose to remove any clogs.

3. Insert the handle in place and return the

ring to its original position.

4. Check the dust ﬁlter cover in the dust bin

and clean if necessary (See CLEANING

DUST BIN, page 14).

5. Check the secondary ﬁlter and clean if

necessary (See CLEANING SECONDARY

FILTER, page 17).

6. Check exhaust ﬁlter and replace if

necessary (See REPLACING EXHAUST

FILTER, page 16).

CAUTION

Product Damage Hazard

Do not use the hose without the handle in

place. If the hose is used without the

handle, the hose will bend excessively,

causing it to crack.

CAUTION

Do not use attachments if they are wet.

Attachments used in dirty areas, such as

under a refrigerator, should not be used

on other surfaces until they are washed.

They could leave marks.

1. Turn oﬀ and unplug vacuum cleaner. DO

NOT drip water on vacuum cleaner.

2. To clean exterior, or to reduce static

electricity and dust build-up, wipe outer

surface with a clean, soft cloth that has

been dipped in a solution of mild liquid

detergent and water, then wrung dry. Wipe

dry after cleaning.

Handle

Removal

Ring

TURBINE UNIT

The turbine unit has a clean-out port for

removing clogs.

1. Press latches inward and lift oﬀ clean-out

port cover.

2. Remove any debris or build-up.

3. Reinstall cover. Make sure it is

completely secured in place. A noticeable

“click” should be heard.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare