Kenmore 3060FR02 Installationsanleitung PDF herunterladen (Seite 6)

EN-4

Prepare Cutout/Cabinet Opening

1. On the cutout ﬂoor, ﬁnd and mark the centerline.

2. Place the bottom duct in the opening, with the ﬂange resting

against the bottom front facing of the opening.

A. Cutout ﬂoor

B. Centerline

C. Bottom duct

D. Bottom duct ﬂange

E. Front facing

D E

3. Align the center arrows on the bottom duct with the centerline

drawn in Step 1 above.

4. Mark the three mounting holes through the bottom duct onto

the cutout ﬂoor.

A. Bottom duct

B. Center arrows, aligned with centerline

A. Short screws (3)

B. Bottom duct mounting holes

5. Using a 7/64" drill bit, drill pilot holes into the three hole marks

6. Realign and install the bottom duct with three short screws.

7. Using 7/64" drill bit, drill pilot holes through the four bottom

the cutout/cabinet opening.

A. Bottom duct ﬂange

B. Mounting holes

shown in the ﬁgure above.

duct flange mounting holes into the bottom front facing of

Install the Microwave Oven

1. return microwave oven to its upright position.

2. Position microwave oven near cutout opening.

3. Plug in microwave oven.

4. Align the rails with the rail guides on the bottom duct.

A. Rail guides

B. Rails

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

ﬁre, or electrical shock.

WARNING

Carefully

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Kommentare zu diesen Handbüchern

Keine Kommentare

Kenmore 3060FR02 Installationsanleitung Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Kenmore 3060FR02