Kenmore C970-40853 Bedienungsanleitung PDF herunterladen (Seite 10)





1. Once cooking is complete, touch the key pad to turn

the Cooking Zone OFF.

2. The corresponding Cooking Zone ON/OFF LED located

above the

key pad will turn OFF. A beep will sound

and the chosen Cooking Zone display will turn o. If no

other key pads are touched the Cooking Zone will shut

OFF.

3. When any Cooking Zone is OFF, the corresponding

Cooking Zone display may show HE if the Cooking Zone

temperature is HOT. The display will continue to indicate

HE, and even if the Cooktop is switched OFF the display

will continue to indicate HE as long as the cooking zone

remains HOT.

The Cooking Zones may appear to be cool

while turned ON and after they have been turned OFF.

But the glass surface may be HOT from residual heat

transferred from the cookware and burns may occur if

surface is touched.

Operating the Bridge Cooking Zones

The bridge mode joins the two left cooking zones together.

To use the bridge cooking zone, both left side cooking zone

should be o. Press the Bridge

key pad (Fig. 24), the

bridge indicator light will turn on (Fig. 24). Adjust the power

setting by using left front or left rear cooking zone control.

To exit Bridge mode, press the Bridge

key pad, the bridge

indicator light will turn o.

 Power Boost is not available when bridge mode is

active.

Setting Cooktop Controls



Operating the Cooking Zones

The Induction cooktop has Cooking Zones designed for

cookware of various sizes. Be sure to place cookware that

meets the minimum and maximum pan size requirements

(Figs. 8 & 9) for the Cooking Zone desired and is best for

the amount of food being prepared. Place the cookware

with the prepared food on the Cooking Zone 

setting any of the Cooktop controls.

To Turn ON one or more of the Cooking Zones:

1. Place the prepared food using the correct type and size

cookware on the desired Cooking Zone. Be sure to center

the cookware on the Cooking Zone.

2. Touch and hold the

key pad for 2 seconds (or until a

beep sounds). The Power LED located above the

key

pad will turn ON.  If no other key pad is touched

within 10 seconds the request to Power ON the cooktop

will clear.

3. To start one or more of the Cooking Zones lightly touch

the

key pad for the Cooking Zones needed. A beep

will sound and the chosen Cooking Zone display will show

“- -(Fig. 16) indicating no power level for the Zone has

been set yet. : If no other key pad is touched within

10 seconds the request to Power ON the Cooktop Zone

will clear.

4. Set the desired power level for the Cooking Zone by using

one of the three methods explained earlier. If the

key

pad (Fig. 22) is touched the Cooking Zone will start at HI

power level (the Cooking Zone display will indicate ). If

the

key pad (Fig. 21) is touched once the Cooking Zone

will start at the low power level (the Cooking Zone display

will show  and the control will beep once). 

If the cookware requirements for the Cooking Zone

(See pages 6 & 7) are not met the sensors will detect a

problem and the display will ash with the power level in

the aected Cooking Zone display. Any problems must be

corrected before proceeding.

 Touch once, or repeatedly touch the

or key

pads to adjust or scroll through power levels at any time

during the cooking process (To scroll through the power

levels quickly touch and hold the

or key pads until the

power level desired is reached). Once the Cooking Zone

power level has been set the food will begin to heat at that

level until the power level is manually changed.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Kenmore C970-40853 Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Kenmore C970-40853