Kenmore C970-40853 Bedienungsanleitung PDF herunterladen (Seite 16)





 



operate.

Cooktop controls are locked. Set the cooktop controls to unlock the Cooktop.

Make sure household electrical circuit breaker is ON and that power is properly supplied to the Cooktop.

Service wiring is not complete. Call  for installation assistance.

Electrical power outage. Check house lights to be sure. Call your local electric company for service.



cooking.

Cooktop internal heat sensor has detected high temperatures inside the appliance. Be sure the

appliance vent holes are not blocked. 

cooktop for more detailed cooktop installation information.

Fluids spilled or object lying on controls area of cooktop. Clean spills or remove object. Repower cooktop.

Cooking Zone does not

heat food (Power level



No cookware was placed on the Cooking Zone, or the cookware material type is incorrect for

Induction Cooking.

Cookware bottom not large enough for Cooking Zone.

Cookware is warped or in poor condition.

Cookware is not centered on Cooking Zone.

Cookware resting on cooktop trim or does not rest completely on cooktop surface.

Cooking Zone does not

heat food.

No power to the appliance. Check steps under "" in this checklist.

Incorrect Cooking Zone control setting. Make sure the correct control is ON for the Cooking Zone being used.

Cooking Zone heats

food too hot or not hot

enough.

Incorrect power level setting. Adjust the power level setting higher or lower and refer to recipe

for guidance and adjust accordingly.



evenly.

Lightweight or warped pans were used. Be sure to use good quality cookware.

Use only at bottom, evenly balanced medium or heavyweight cookware. Heavy and medium

weight pans heat evenly. Because lightweight pans heat unevenly, foods may burn more easily.

Adjust Cooking Zone power level setting until the proper amount of heat is obtained.

Poor cooking results. Many factors aect cooking results. Adjust the recipe’s recommended power levels or cooking times.

Cookware is too lightweight or warped. Use heavier quality cookware so foods being prepared

may cook more evenly.

Cooktop Zone Control

displays C or timer

display displays a 2

digits error code.

Induction Cooktop main control has detected a fault or error condition. Try turning electrical

power supply OFF and back ON to cooktop in order to reset Cooktop main controls. Make sure

nothing touch control panel area (utensils, cookware, etc.). If fault recurs, record fault number

and turn power supply to Cooktop OFF. Call  for assistance (See back

cover).





Induction Cooktop pan detection sensors do not see the correct cookware. Test with a magnet

to be sure cookware is made with Induction compatible material.

Cookware has been removed from the Cooking Zone without turning the Cooking Zone OFF. Place

cookware back on to the Cooking Zone or if nished cooking turn o the aected Cooking Zone.

Cookware is not centered over the Cooking Zone properly. Refer to Fig. 7 for correct cookware

placement.

Metal marks on ceramic

cooktop surface

Sliding or scraping of metal utensils on cooktop surface. DO NOT slide cookware or cooking utensils

across the cooktop surface. Use the recommended ceramic glass cooktop cleaning creme to remove

the marks. See "Cooktop Cleaning & Maintenance" in the section.

Scratches or abrasions

on ceramic cooktop

surface

Coarse particles such as salt or sand between cooktop and cookware or cooking utensils can

cause scratches. Be sure cooktop surface and bottoms of utensils are clean before placing on

cooktop. Small scratches do not aect cooking and will become less visible with time.

Cleaning materials not recommended for ceramic-glass cooktop have been used. See "Cooktop

Cleaning & Maintenance" in the section.

Cookware with rough bottoms was used. Use smooth, at-bottomed cookware ONLY.

Brown streaks or specks

on ceramic cooktop

surface

Boil overs are cooked onto cooktop surface. Use a razor blade scraper to remove soil. See

"Cooktop Cleaning & Maintenance" in the section.



with metallic sheen on

ceramic cooktop surface

Mineral deposits from food and/or water. Remove using a ceramic-glass cooktop cleaning

creme. Remember to use cookware with clean, dry bottoms. For more information See

"Cooktop Cleaning and Maintenance" in the section.

Cooktop makes buzzing

noise.

Cookware is damaged. Please see pages 6 & 7 of this manual. Also see “Operational noise”

section on page 12.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Kenmore C970-40853 Bedienungsanleitung Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Kenmore C970-40853