Kenmore C970-40853 Bedienungsanleitung PDF herunterladen (Seite 8)





This feature allows the cooktop to be locked only when the

cooktop is switched to OFF.

To turn ON the Controls Lock feature, touch and hold the

LOCK key pad for 3 seconds. A beep will sound and the

Lock LED will glow (Fig. 14). Once locked, no other displays

will glow and no Cooking Zones will activate (Except the hot

surface message “HE” if the zone is hot).

To turn the Controls Lock OFF, touch and hold the LOCK key

pad for 3 seconds. A beep will sound, the Lock LED will turn

OFF (Fig. 13) and the cooktop may be used normally.

Cooktop Control Pads

Cooktop Power Pad

The Cooktop POWER key pad activates the entire Cooktop.

To power the cooktop, touch and hold the POWER key pad

for 2 seconds. A beep will sound and the Power LED will glow

(Fig. 12). The cooktop will be in a ready mode for 10 seconds.

If no other key pads are touched the Cooktop Main POWER

will turn OFF automatically.

To turn the Main Power OFF touch and hold the Main POWER

key pad for 1 second. A beep will sound and the Power LED

will turn OFF (Fig. 11).









Minute Timer

The Minute Timer feature may be useful in the kitchen if a

recipe calls for keeping track of time. This feature will keep

track of time from 1 to 99 minutes. The display located to

the left of the Timer UP/DOWN arrow key pads will begin

to count down minutes once set.





Using the Touch Control

Be sure that your nger is placed in the center of the touch

pad. If the nger is not placed on the center of a pad, the

cooktop may not respond to the selection made.

Lightly contact the pad with the at part of your entire

ngertip. Do not just use the narrow end of your ngertip.

To Set the Minute Timer:

1. Start the cooktop timer by touching the “Timer Set/O”

pad. Touching and releasing the

or the key pads

will increase or decrease the Minute Timer setting by 1

minute with each key press (up to 99 minutes). You may

also hold the

or key to slew the time to your

designated time.

2. Once the Timer display the desired amount of time,

release the

or arrow key pads. The timer

will display the time remaining in minutes within the

countdown process. During the last 60 seconds, the timer

will countdown in seconds.

Note: After the timer is set, it is normal for the displayed

value to automatically go down by one minute. This is

due to the fact that the display only shows the minutes

remaining and does not show the countdown process in

the back ground. For example when setting the timer for

3 minutes, the timer will start counting down at 02 min 59

seconds, but the timer display will only show 02 minutes,

not the remaining seconds.

Once the Minute Timer reaches 00, it will ash and a long

beep will sound every 5 seconds indicating that the time

is up. The Minute Timer will keep beeping until the “Timer

Set/O” key pad is touched.

To Cancel the Minute Timer:

At any time to cancel the minute timer, press the Timer Set/

O pad.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Kenmore C970-40853 Bedienungsanleitung Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Kenmore C970-40853